The Triple Helipuller™ is designed to pull on 3 cables of 4.8 to 6 mm in diameter, such as 3 x CAT6, 3 x CAT5E or 3 x 4.8 mm optical fiber cables. It'll pull through a slightly bigger than a 1/2'' but much less than a 3/4” hole or conduit. It is flexible, and will allow pulling through multiple 3/4'' diam. 90-degree conduit/bends. It was even proven easy to pull through 1440 degrees of bends of Duraline 3/4'' FuturePath conduit, without any junction box. Here we show the Triple Helipuller™ attached, at the same time, to 3 bare cables; a CAT6, a 4.8 mm diam. self-bend limiting PON/POL fiber-optic cable, as well as a 2xAWG16 Class4 power cable (i.e. speaker wire). It'll do 30 pounds of pull force, attach to a pull tape, or a fish, to glow rods/pulling sticks, to a Manepull head, etc.
The Triple Helipuller™ is available in 4 threaded end variants, #8-32, M4, M5 and 1/4”, which means that you can be sure to get variant that is compatible with your pulling stick. Like all Helipuller™ cable pulling adapters, it is supplied with a PULR™ Pull Tape Adapter which makes it easy to attach a pull tape/pull rope/steel fish tape.