ReadyToPull SC-P 3 mm 50-feet Kit

Our ReadyToPull™ SC 3 mm 50-feet Kit bundles a high-quality 50-feet 3 mm diameter SC/APC indoor-outdoor patch cable with our unique tool, saving you 3 to 10 minutes on every FTTH installation. The patch cable has an indoor-outdoor rated sheath that is self-bend limiting and thus provides anti-kinking ruggedness, which allows sharp 90 bends around walls on baseboards. This is important for the indoor run to the ONU from the NID on the outside, which allows the cable to safely go around any wall corner. The tool provides a push (from the outside) of up to 15 lbs and a pull (from the inside) of up to 5 lbs.  Its now easy to get across most walls in the tiniest of holes (3/8'') or small diameter conduits (1/2'' diameter), even with very sharp bends (4-inch radius 90-degree). The tool protects the SC/A patch cable connector while pushing and pulling. No failed connectors. No snags or patch cables getting caught up by tape in the hole. No cable falling in the cavity of the wall. The tool features a standard #8-32 threaded head, compatible with our PULR Sticks or your existing #8-32 sticks (Klein, Jonard, Greenlee, LSDI). You can also attach to it the optional PULR™ Pull Tape Adapter which makes it possible to pull inside a conduit attached to pull tape/rope/steel fish. Watch our comprehensive tutorial on Youtube to learn the secret to get an SC/A connector pulled in a 3/8'' hole!  Oh, and there is more, each of our ReadyToPull™ SC-P Kits come with a fully reprogrammable Helitag™ NFC Digital Product Passport, with a mirrored copy of the patch cord test results, so you know when you take the patch cable of out the bag, you can refer later to the patch cord serial number and test results. You can also write the optical signal level into the tag using NFC Tools on your phone. This will spearhead the movement towards digital twinning!

To be sent a PDF product datasheet, please complete the form below and we will send to your email.